 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 511-1 SMT Data Line EMI Filters - CCDLF * Available in 10 and 8-line versions * See our PDLF series for 4, 3 and 2-line EMI filters * Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation * DC current capacity of 500 or 100 mA. * Excellent electrical isolation (300 Vrms) Designer's Kit D303 contains four each of all values plus DLF and PDLF filters Core material Ferrite Terminations RoHS compliant tin-silver-copper over silverplatinum. Other terminations available at additional cost. Weight CCDLF 8000: 540 mg; 10000: 670 mg CCDLF 8500: 559 mg;CCDLF Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Part number1 CCDLF 10000L_ CCDLF 8000L_ CCDLF 8500L_ Lines 10 8 8 Current max (mA)2 100 100 500 L DCR min max Color (H)3 (mOhms) Dot 5 5 5 250 250 200 Brown Black Green Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 1000/13 reel Plastic tape: 16 mm wide CCDLF8x00: 10.46 mm thick, 12 mm pocket spacing, 4.5 mm pocket depth CCDLF10000: 10.28 mm thick, 12 mm pocket spacing, 5.0 mm pocket depth PCB washing Only pure water or alcohol recommended 1. When ordering, please specify termination and packaging codes: CCDLF 8500LD Attenuation (dB) Termination L = RoHS compliant tin-silver-copper over silver-platinum Special order: S = non-RoHS tin-lead (63/37). Packaging D = 13 machine ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Current rating is for each line. 3. Inductance is per winding, tested at 1 MHz. 4. Operating temperature range -40C to +85C. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Typical Response* -10 Differential Mode 0 10 20 Common Mode 30 0.1 1 10 100 1000 Frequency (MHz) *Measured on HP 8753D network analyzer. Ref: 50 Ohms. Specifications subject to change without notice. Please check our website for latest information. Document 511-1 Revised 10/30/08 (c) Coilcraft, Inc. 2009 Document 511-2 Surface Mount Data Line EMI Filters CCDLF 10000 0.060 ref 1,52 0.040 typ 1,02 0.030 0,76 0.360max 9,14 1 0.020 0,51 6 Recommended Land Pattern 5 4 3 2 1 16 17 18 19 20 5 4 3 2 1 20 19 18 17 7 0.270 0.230 8 6,86 5,84 0.050 cen 1,27 20 15 14 13 12 11 6 7 8 9 10 9 10 0.050cen 1,27 11 12 13 14 15 16 0.050 1,27 0.360 max 9,14 0.170 max 4,32 0.030 0,76 Dimensions are in inches mm CCDLF 8000, 8500 0.060ref 1,52 0.040 typ 1,02 0.030 0,76 0.305 max 7,75 1 16 0.305 max 7,75 inches mm 0.050 cen 1,27 0.020 0,51 5 Recommended Land Pattern 4 3 2 1 8 7 6 5 9 10 11 12 16 15 14 0.220 0.180 5,59 4,57 7 8 6 0.050cen 1,27 9 10 11 12 1 2 3 4 16 15 14 13 13 0.050 1,27 0.170max 4,32 0.030 0,76 Dimensions are in Dot indicates pin 1 Part number Internal code (c) Coilcraft, Inc. 2009 C C D LF 80 00 L X Parts manufactured prior to Sept 2007 may not be marked with part number and internal code. Specifications subject to change without notice. Please check our website for latest information. Document 511-2 Revised 10/30/08 |
Price & Availability of CCDLF8000L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |